Machining Hardened Steel Cubic Boron Nitride Cutting Tools Wind Turbine Bearing

Wind power bearings are often made of 42CrMo4 main material, and then subjected to the following steps for forging technology.

(1)Roughing: Forging type wind power bearings are processed, and carbide tools are selected for processing. For high hardness (above HRC454), Halnn Tools cubic boron nitride inserts can be selected to achieve a depth of 7.5mm. After that, there is a corresponding machining allowance for the subsequent finishing.

(2)Heat treatment: heat treatment of wind power bearings after roughing to improve the hardness, wear resistance and impact resistance of the workpiece, and obtain a good service life.

(3)Finishing: Finished machining of heat-treated workpieces. With the development of modern technology, surface roughness turning tools with accuracy requirements of Ra0.8 can meet the requirements.

2.Detailed Data of CBN Cutting Tool

Type	Dimension					Standard Chamfer	Grades
	L(mm)	φI.C(mm)	S(mm)	φd(mm)	r(mm)		BN-H05	BN-H10	BN-H21
CNGA120404-4S	12.9	12.7	4.76	5.16	0.4	S01015 S01020 S01025 S02020 S02025	◎	◎	◎
CNGA120408-4S	12.9	12.7	4.76	5.16	0.8		◎	◎	◎
CNGA120412-4S	12.9	12.7	4.76	5.16	1.2		◎	◎	◎
CNGA120416-4S	12.9	12.7	4.76	5.16	1.6		◎	◎	◎

3.Pictures of Halnn Tools CBN Cutting Tool

4.Application Case of CBN Cutting Tool Machining Bearing

Machining Hardened Steel Wind turbine bearing with Hard Turning PCBN Insert from Halnn Supplier

5.Service

Pre-Sales Service

l) Prompt reply and 24 hours online,professional team to provide best price and quality product.

l) Same testing support

l ) Every batch of products will be tested to ensure its quality.

After-sales Service

l) The real-time logistics information monitoring

l ) Any questions about the product can be consulted at any time.

l) Product with any problem can return.